FLESHROT DELUXE
$300.00 USD
As requested by many of you this is our take on a 2-channel version of the FleshRot with a clean voiced similar to the original added.
This is the one for you if you're looking for heavy death metal brutality to put in front of your amp or use as a preamp into your interface or power amp.
Controls
| Name | Location | Description |
|---|---|---|
| Gain (both channels) | External | Controls the amount of gain/distortion |
| Level (both channels) | External | Controls the output volume. |
| Tight (dirty) | External |
Tighten up that flub in your low end without thinning it out.
Full CCW for v1. |
| Low (dirty) | External | Cut/boost the bass frequencies. |
| Low (clean) | External | Post-gain passive type circuit for bass frequencies. |
| Mid (dirty) | External | Adjust the amount of the mid scoop. |
| Mid (clean) | External | Post-gain passive type circuit for mid frequencies. |
| Shift | External |
Adjust the center frequency of the mid scoop.
Noonish for v1. |
| High (dirty) | External | Cut/boost the high frequencies. |
| High (clean) | External | Active pre-gain tone control. At higher gain settings this will affect the amount of sustain and distortion. |
| Pres[ence] (dirty) | External | Unbox that top end in higher frequencies. |
| Bright (clean) | External | It is designed to add top-end sparkle to the clean channel, often described as similar to a Roland JC-120 in brightness when engaged. Itis most prominent at lower settings of the Channel B volume knob. |
| Bypass LED Brightness | Internal |
Adjust overall brightness of front LED.
Default setting at minimum (full CCW). |