FLESHROT 60W MONO
$349.00 USD
Description
The plan since the beginning of THE has been to bring several of my ideas to fruition as full amp heads. What once was just custom tube builds and mods, has evolved into the creation of a killer solidstate platform thanks to modern class d power amp technology. Mix that new technology with my preamp designs and you have an absolutely punishing, lightweight small form factor weapon of destruction.
The class d power section of this is the same as Higher Power 2. Speaker impedance of 4-16 ohms. On a 24VDC 2.7A or greater power supply you’ll get 60W@4ohm.
Power supply by others. Reference Power Specifications section of the product page.
Power Specifications
24VDC - POLARITY INSENSITIVE (CENTER NEGATIVE OR POSITIVE) This product has internal circuitry to modify the 24v signal to bipolar 15v for 30v total of headroom. Using a power supply smaller than 24VDC may not operate and possibly can damage this product! Recommend a minimum of 2.7A power supply or larger.Switching System
TRUE BYPASS Relay bypass with momentary footswitch. Tap to toggle. Hold for momentary.Controls
| Name | Location | Description |
|---|---|---|
| Gain | External | Controls the amount of distortion |
| Level | External | Controls the output volume. |
| Tight | External |
Tighten up that flub in your low end without thinning it out.
Full CCW for v1. |
| Low | External | Cut/boost the bass frequencies. |
| Mid | External | Adjust the amount of the mid scoop. |
| Shift | External |
Adjust the center frequency of the mid scoop.
Noonish for v1. |
| High | External | Cut/boost the bass frequencies. |
| Pres[ence] | External |
Unbox that top end in higher frequencies.
Full CCW for v1. |